Remove the adjustment mechanism it's often part of the bracket holding the switch in place! As for identifying the pressure switch, that's easy. Nine times out of 10, it's directly behind the 'water level' adjustment knob in the top control panel of the machine. If the machine's upside down or partly destroyed, follow the sensing tube from the base of the wash tub. And while you're at it, it's also usually worth scrounging the tube, which is often a high-quality plastic hose. You never know when it might come in handy.By contrast, dishwasher pressure switches are normally buried beneath the stainless steel drum.
Most appliance manufacturers have now found it advantageous to employ a small switch or micro-switch, to stop the spin action. An actuator protruding from the lid of the automatic washer causes the switch to open before the lid is raised 2 inches. Electrical, either type of spin-stop lid or door safety switch is usually connected to wires between the spin solenoid and the timer. In this way, when the operator raises the lid during spin, the switch opens and the timer circuit to the spin solenoid is broken. By keeping the actuator clean and free of debris, you can avoid unwanted appliance repair service calls.