During ‘on’ time of spin direction timer IC2, the output of negative- edge triggerd JK flip-flop at pin 2 goes low to energise relay RL2 and washing machine motor rotates in one direction. During the off time of IC2, the output of N1 goes high again to de-energise relay RL1, which cuts off the mains supply to RL2 and the monitor stop rotating. Floating point trouble may occur at trigger pin 2 of IC1. Resister R8 over comes this problem by holding pin 2 high.
These switches also look a lot like washing machine pressure switches, except they have multiple electrical terminals (six or even nine) and don't have external level adjustment. However, some have screwdriver adjustment for both the trip levels and the hysteresis. When extracting the pressure switch from a washing machine, be careful that you don't also inadvertently