Washing Machine Diagram / August 27, 2018 / Maylee Weldon.
It’s always possible somebody somewhere has posted a wiring diagram on a forum in response to a request, but generally I would think the odds of finding one are pretty low. The best thing to search in Google for (if you haven’t already tried) would be the words, wiring diagram, or wiring schematic, followed by the model number of your appliance ( Where to find the proper model number and serial number on a washing machine ). There are some repair manuals being sold but these are very general and not model specific and written by third parties. All the ones I’ve seen are very much out of date although they may well still contain some useful general advice and knowledge.
These switches also look a lot like washing machine pressure switches, except they have multiple electrical terminals (six or even nine) and don't have external level adjustment. However, some have screwdriver adjustment for both the trip levels and the hysteresis. When extracting the pressure switch from a washing machine, be careful that you don't also inadvertently
The master timer is realised with monostable IC 555 (IC1) and its ‘on’ time is decided by the resistance of 1-mega-ohm potmeter VR. A 47-kilo-ohm resistor is added in series so that even when the VR knob is in zero resistance position, the net series resistance is not zero.
Because they're not externally adjustable, they don't need to be located close to the control panel. Depending on your application, you might want your salvaged pressure switch to operate at pressures that are different to its standard range. That's not hard to do if you have a washing machine pressure switch, as they are quite easy to modify.In standard form, turning the adjustment control typically allows the trip pressure to be set to detect water depths anywhere from 9cm to 20cm. But if you remove the adjustment.