Washing Machine Diagram / August 25, 2018 / Justice Zhou.
If your washing machine blows a fuse or circuit breaker within a few minutes of turning it on, this could be many things and would need further testing but one of the things that could be causing the fuse to blow is a faulty water heater element.If your wash is not coming out as clean as it used to, this again could be a indicator of a faulty element as the clothes could be washing in cold water.
It’s always possible somebody somewhere has posted a wiring diagram on a forum in response to a request, but generally I would think the odds of finding one are pretty low. The best thing to search in Google for (if you haven’t already tried) would be the words, wiring diagram, or wiring schematic, followed by the model number of your appliance ( Where to find the proper model number and serial number on a washing machine ). There are some repair manuals being sold but these are very general and not model specific and written by third parties. All the ones I’ve seen are very much out of date although they may well still contain some useful general advice and knowledge.
Remove the adjustment mechanism it's often part of the bracket holding the switch in place! As for identifying the pressure switch, that's easy. Nine times out of 10, it's directly behind the 'water level' adjustment knob in the top control panel of the machine. If the machine's upside down or partly destroyed, follow the sensing tube from the base of the wash tub. And while you're at it, it's also usually worth scrounging the tube, which is often a high-quality plastic hose. You never know when it might come in handy.By contrast, dishwasher pressure switches are normally buried beneath the stainless steel drum.
Because they're not externally adjustable, they don't need to be located close to the control panel. Depending on your application, you might want your salvaged pressure switch to operate at pressures that are different to its standard range. That's not hard to do if you have a washing machine pressure switch, as they are quite easy to modify.In standard form, turning the adjustment control typically allows the trip pressure to be set to detect water depths anywhere from 9cm to 20cm. But if you remove the adjustment.