Washing Machine Parts / August 24, 2018 / Lena Willingham.
Even your average machine from Maytag, Whirlpool, GE and many of the other common brands eventually will balk at the neglect. Many times, these are basic repair issues. Replacing a band or pump, for example, is pretty easy to do. A good deal of the problems don't even require repair - a quick troubleshooting, like taking a kink out of a hose is all they need at times. If it is a little more problematic, affordable washing machine parts can be purchased for these same aforementioned brands on several internet sites.
It is therefore essential for a consumer to maintain the washing machine whether it is old or new. Remember that washing machine has many moving parts as can be seen. Moving parts will cause wear and tear. Similarly the temperature of water also causes impacts on the parts of the machine. Detergents, bleaches and softeners used for washing have acid contents which will react with certain parts of the machine especially metallic parts. Residues formed after the washing process may get deposited in different places in the interiors of the machine.
Periodically clean the interiors of the machine with water, baking soda (half cup) and white vinegar (3 cups). Run the machine without load after filling water with the above substances. All residues and deposits formed inside will be removed. If necessary consult the company representative about the preventive maintenance. In the case of new machines make use of the free maintenance service offered by the manufacturers. Remember the adage "prevention is better than cure".
Replacing parts does not lower the products standards. It is the same unit even enhanced and improved with something new. It can be comparable to a turkey filled with stuffing for Thanksgiving. It is the same fowl animal with something better inside. The outer covering remains the same despite changes inside.