Washing Machine Diagram / August 20, 2018 / Ember Simon.
A defective water heater element prevents the water from heating in a washing machine. Some hints are provided in this content to check whether you have an out of order heating element in your washer. There are ways to make sure if you have a water heater element in your washing machine, which is not working. If the fuse or circuit breaker blows within a few minutes of turning on your washing machine, there is a chance the fault is with the systems heating element.
At times you may feel your laundry is not coming out as clean as it used to be, then also you can doubt the possibility of an error in the heating element. Most probably the clothes might not be getting hot water and consequently they might be getting washed in cold water!
The above mentioned signs may or may not indicate a faulty heating element. The reasons for the above noted symptoms might be some thing else. The sure way to confirm a faulty heater is using the ohmmeter. It is a device for checking electrical values like resistance between 2 conductive appliances. To test if an element is working or not a professional connects neutral wires to the related connectors on the element and verify it for a positive reading.
You should be competent with electrics with a degree of experience to do the above test has it involves opening your appliance and removing and replacing wires inside the machine that will become live once the wires are replaced and the washing machine is turned on, there is no "zero" place for mistakes on this job, if you do not fully understand house hold electrics you should not attempt the test. You can get a lot more free advice or a low cost repairs source by following this link to our washing machine repairs web page.